Worthington 12LNC21 Pumps
7400 GPM @ 220 TDH
Back To Worthington Pump Index Page
![[Click to enlarge]](tn_Worthington 12LNC21 Pumps, 7400 GPM @ 220 TDH.jpg) |
|
Worthington 12LNC21 Pumps 7400 GPM @ 220 TDH |
Worthington Model Number: 12LNC21 Pumps. 7,400 GPM @ 220TDH FT. Used, Good Condition. Qty 5: Skid-mounted units as shown including: Worthington Model 12LNC21 pump; 7400 gpm, 220 TDH FT. Titan II electric motors; 500 HP, 4160 Volts, 61 amps, 1775 RPM. Lufkin gear box; Model S85CH, 1.302:1 ratio, 500 HP, water-cooled, w/coupling and drive shaft.
(Qty 5) Motor controllers on separate
skid: GE Limitamp, Model CR194A118D2, 3 phase, 60 hz, 4160 volts, 61 amps,
115 volt control circuit, 500 HP, 61 amp-full load current.
(Qty 5) vacuum switches - loose.
(Qty 5) 12" 150B butterfly flow control valves w/Pratt manual
gear operators, each with a 12" Techno check valve - loose.
(Qty 1) Vacuum pump and tank for pump priming.
(Qty1) Cla-Val 4" surge relief valve (set at 60psi).
SML RESOURCES INTERNATIONAL
FOR INQUIRIES CONTACT
ROY LEADER