Sturtevant 16' Whirlwind Air Classifier
Back to Process Equipment Index Page
![[Click to enlarge]](tn_Sturtevant 16 Ft. Air Separator (Pic1).jpg) |
![[Click to enlarge]](tn_Sturtevant 16' Whirlwind Air Classifier (Pic2).jpg) |
![[Click to enlarge]](tn_Feed Spout on Top of Sturtevant (Pic3).jpg) |
![[Click to enlarge]](tn_Top of Sturtevant (Pic4).jpg) |
| Sturtevant 16' Air Separator (Pic1) | Sturtevant 16' Whirlwind Air Classifier (Pic2) |
Feed Spout on Top of Sturtevant (Pic3) | Top of Sturtevant (Pic4) |
![[Click to enlarge]](tn_Top of Sturtevant (Pic5).jpg) |
![[Click to enlarge]](tn_Stairs to Sturtevant (Pic6).jpg) |
![[Click to enlarge]](tn_Feed Spout (left) & 100 HP Motor (right) on top of Sturtevant (Pic7).jpg) |
![[Click to enlarge]](tn_Top of Sturtevant (Pic8).jpg) |
| Top of Sturtevant (Pic5) |
Stairs to Sturtevant (Pic6) |
Feed Spout (left) & 100 HP Motor (right) on top of Sturtevant (Pic7) | Top of Sturtevant (Pic8) |
![[Click to enlarge]](tn_Bottom of Sturtevant (Pic9).jpg) |
![[Click to enlarge]](tn_Bottom of Sturtevant (Pic10).jpg) |
![[Click to enlarge]](tn_Bottom of Sturtevant (Pic11).jpg) |
|
| Bottom of Sturtevant (Pic9) |
Bottom of Sturtevant (Pic10) |
Bottom of Sturtevant (Pic11) |
Qty 1: Sturtevant 16' Whirlwind Classifier (Air Separator). Height from top of 100 HP Motor to outlet flange: 24'-5". Top width: 16'-5". Minimum clearance above motor: 6'-3". Airflow (Vent): 675 CFM. Feed Rate: 125 TPH.
THE WHIRLWIND CLASSIFIER
The Whirlwind Classifier offers an exceptional ability to achieve a wide range
of separations. Its features allow precise definition and delivery of the
desired size product while delivering the following benefits: Fine classification
of materials. Lowest capital cost: no auxiliary equipment, such as cyclones,
process dust collectors, air locks, and system fans, are needed. Consistent,
high-quality product: external adjustment for variation in feed material.
Saves on operating expenses: Low energy consumption. Reduced maintenance;
durable, wear-resistant liners. Processes abrasive materials; long-wearing,
ceramic liners and inexpensive, steel replaceable liners
How it works: Material entering through the feed spout is subjected
to centrifugal force, throwing coarse particles away from the distributing
plate and into the air flow. Due to gravity, large particles settle into the
coarse cone. Finer particles are swept upward where selector blades generate
further classification. During this secondary separation, oversized particles
are spun out of the air flow and drop down into the coarse cone. The selected
fines continue through the circulating fan and into the fines cone. Fines
drop out of the recirculated air flow at the fixed return air vanes.
APPLICATIONS: Aggregates, crushed stone, Cement, Ceramics, Chemicals, Coal, Diatomaceous earth, Fly ash, Food products, Gypsum, Hydrated lime, Minerals, Plastics, Silica sand, Soda ash, bicarbonate.
SML RESOURCES INTERNATIONAL
FOR INQUIRIES CONTACT
ROY LEADER