Kinetrol Pneumatic Actuators, Qty 105 Used

Return To Main Equipment Page

Return To Actuator Index Page

[Click to enlarge] [Click to enlarge] [Click to enlarge] [Click to enlarge]
Kinetrol 169-100 Actuator (Pic2)
 Kinetrol 169-100 Actuators (Pic1)
 Kinetrol Actuators (Pic3)
 Kinetrol Actuators (Pic4)
[Click to enlarge] [Click to enlarge]
Kinetrol Actuators (Pic5)
 Kinetrol Actuators (Pic6)

Qty 10: 079-100, Rated: 1,080 In.-lbs @ 100 PSI Air Supply Pressure

Qty 45: 149-100, Rated: 12,000 In.-lbs @ 100 PSI Air Supply Pressure

Qty 50: 169-100, Rated: 27,000 In.-lbs @ 100 PSI Air Supply Pressure

Note: All of these Kinetrol Actuators were used at a water treatment plant for 3-5 years. Very low usage on filter valves. Valves were operated less than once per day. The expected life of these actuators is 10-20 years with moderate usage. The number of strokes these units have seen is about 700-800 strokes. The standard Kinetrol is designed for up to 4 million operations without any required maintenance. All units have been tested for operational integrity and are ready for installation.

Kinetrol Quarter Turn Pneumatic Vane Actuators

The Kinetrol Vane Actuator - Simply the Best

1) Single moving part: Simplest and most reliable mechanism for quarter-turn rotary actuation.
2) Direct mounting control modules: Fail-safe spring returns, limit switches, positioners, solenoid valves, all just bolt on direct.
3) No cranks or gearing: No power loss or backlash - allows accurate positioning.
4) Durable corrosion resistant finish
5) Long maintenance-free life: Up to 4 million operations guaranteed.
6) Compact - space saving - efficient: Best torque/size package available, fast operating speeds, best air consumption, proven design.
7) Hundreds of thousands of units in trouble free service all over the world
8) Choice of male or female output drive square - easy to interface to application

Casing: Pressure die cast ILZRO 16 zinc alloy. Models 16/18/20 aluminium LM25
Vane and output shaft: Models 07 upwards SG iron, zinc plated.
Shaft bushes: Glacier DU.
Seals: Moulded polyurethane.
Seal expanders: Stainless spring steel.
Couplings: Weldable mild steel, zinc plated.
Working temperature range: -20°C (-5°F) to 80°C (175°F).
Maximum working pressure: 100 psi (7 bar).
Maximum overload pressure: 150 psi (10 bar).

SML RESOURCES INTERNATIONAL
FOR INQUIRIES CONTACT
ROY LEADER