Costarelli D-1250 Densifier
(for Recycling of Plastic Material)
Return to Main Equipment Page
Back to Process Equipment Index Page
![[Next]](bw_next.gif){kind=small}
|
![[Last]](bw_last.gif){kind=small}
|
![[Click to enlarge]](tn_Costarelli Densifier (Pic1).jpg) |
![[Click to enlarge]](tn_Costarelli Densifier (Pic2).jpg) |
![[Click to enlarge]](tn_Costarelli Densifier (Pic3).jpg) |
![[Click to enlarge]](tn_Costarelli Densifier (Pic4).jpg) |
| Costarelli Densifier (Pic1) |
Costarelli Densifier (Pic2) |
Costarelli Densifier Blower with Invensys 5.5 HP Motor
(Pic3) |
Invensys 5.5 HP Motor(Pic4) |
![[Click to enlarge]](tn_Costarelli Densifier (Pic5).jpg) |
![[Click to enlarge]](tn_Costarelli Densifier (Pic6).jpg) |
![[Click to enlarge]](tn_Costarelli Densifier (Pic7).jpg) |
![[Click to enlarge]](tn_Costarelli Densifier (Pic8).jpg) |
| Costarelli Densifier (Pic5) |
Lube Oil System (Pic6) |
Costarelli Densifier 300 HP Motor (Pic7) |
Costarelli Densifier (Pic8) |
![[Click to enlarge]](tn_Costarelli Densifier (Pic9).jpg) |
![[Click to enlarge]](tn_Costarelli Densifier (Pic10).jpg) |
![[Click to enlarge]](tn_Costarelli Densifier (Pic11).jpg) |
![[Click to enlarge]](tn_Costarelli Densifier (Pic12).jpg) |
| Costarelli Densifier Feed Inlet (Pic9) |
Costarelli Densifier Control Panel (Pic10) |
Costarelli Densifier Interior View (Pic11) | Costarelli Densifier Interior View (Pic12) |
Costarelli D-1250 Densifier. Production:1700-2600 lbs/hr. Dimensions: 110.2" (2800mm) wide X 149.6" (3800mm) long X 92.52" (2350mm) high. BrookCompton Motor: 250KW (300HP), 1485 RPM, 415V/50Hz/3Ph. (wired for 480V/60Hz/3ph), 396 amps, Frame: 7-AD3558H. Weight: 13,300 lbs. Includes: Lube oil system, control panel, hydraulic pump, heat exchanger, blower with 5.5 HP Invensys Motor, platform with stairs. This unit was recently reconditioned and is in very good condition. It can be seen, run & tested in Niagara Falls, NY.
The densifier is a machine ideal for the transformation and recycling of plastics materials from industrial and post consumer wastes. The densifying process consists of blades that are set in high-speed rotation by the motor. The fed material is initially shredded into tiny pieces. At this point, the frictional action between the blade and the plastic film takes over and as a result, the plastic begins to overheat. When the temperature gets to the point that the process material begins to soften, cold water is injected. The thermal shock that is generated produces a rapid aggregation of the material and through the action of the blades, the material is cut into irregularly-shaped granules that differ in size. This densified product can be considered as a final product or can be further processed into extruding.
SML RESOURCES INTERNATIONAL
FOR INQUIRIES CONTACT
ROY LEADER