Back To Filters & Dewatering Press Index Page
Back to Process & Industrial Equipment Index Page
![]() |
![]() |
![]() |
![]() |
| Cosmodyne PD81146 RO Systems, Qty 2 New Surplus (Pic1) |
Multimedia Filter Tanks (Pic2) |
Booster Pump (Pic3) |
Pretreatment Skid Assembly (Pic4) |
![]() |
![]() |
||
| High Pressure Pump (Pic5) | Schematic (Pic6) |
Pre-treatment Assembly: Consists of a Control Box that
includes 12 volt electrical circuitry for input power, controls, indicators
and the chemical metering pumps; a Coagulant Aid and Metering Pump, short
stroke, piston-diaphragm dosing pump with an adjustable amount of coagulant
aid to feed water stream; a Scale Inhibitor Metering Pump that is the same
type as the coagulant aid / metering pump and provides an adjustable amount
of scale inhibitor to the feedwater stream; Cartridge Filter that will contain
12 filter elements which remove matter that escapes the multimedia filters.
Multimedia Filter: Intended to filter water and pass it back to pre-treatment
assembly.
High Pressure Pump and Assembly: Pumps water from the pre-treatment
assembly to reverse osmosis assembly, boosting water pressure to high level
required for reverse osmosis. Powered by a six cylinder diesel engine which
drives high pressure pump through a matched set of 12 V-belts.
Reverse Osmosis Block Assembly: Consists of 16 pressure tubes, each
tube designed to contain five reverse osmosis membrane elements, that filter
the water through the reverse osmosis process.
The offered equipment includes the Booster Pump, the Pre-treatment Skid Assembly;
the Multimedia Filter, the High Pressure Pump, the Reverse Osmosis Block,
and Membranes and Filters originally issued with this equipment by the military.
(The raw water pump and related components described in the attached specification
sheets is for information purposes only, and is not included.)