Bingham Pumps

Return to Main Equipment Page

Back To Pump Index Page

Back to Bingham Pump Index Page

[Click to enlarge] [Click to enlarge] [Click to enlarge]
Bingham MSD, 3X6X9C 9-stage Pumps, Qty 3
 Bingham, 14 x 16 x 19CP Pump, New
 Sulzer-Bingham MSE 3x4x8.75B Pump,350HP, Qty 2

(Pic1) 707 GPM @ 2700' TDH, Bingham MSD, 3X6X9C 9-stage, 3560 RPM motor or turbine,(3)
BOILER FEED PUMPS(3) THREE 707GPM @ 2700 FTDH BINGHAM-WILLAMETTE 9 STAGE (2) TURBINE & (1) MOTOR DRIVEN

(One) Reconditioned 707 GPM* at 2700 FTDH (620 HP) Bingham-Willamette (Sulzer) Boiler Feed Pump, manufactured in 1970. S/N 290787 Double volute radial balance, centrifugal, horizontal, split Size & type - 3 x 6 x 9C MSD, 9-stage, 3" discharge, 6" suction, Impeller diameter 9.375", 3560 RPM. Direct connected to a 1000 HP Westech gearbox, model 2109 MS, S/N 5424, Pinion RPM 3832, Ratio 2.156:1 Driven by a 900 HP Westinghouse drip proof motor, S/N 81F32449-1S-81, Frame 6808S, 3/60/7200V, 64 amps, temperature 90°C RTSF, insulation Class F, Design temperature rise B, Code G, S.F.1.0. Equipped with Allen Bradley vacuum starter with fuse disconnect. All mounted on a common structural steel base.*With this motor and gearbox, the pump operating conditions are 3832 RPM, 765 GPM at 3 16OFTDH requiring 786 BHP.Approximate Dimensions: 241"L x 60"W x 50"H Weight: 15,000 Lbs

(One) Reconditioned 707 GPM at 2700 FTDH (620 HP) Bingham-Willamette (Sulzer) Boiler Feed Pump, manufactured in 1970. S/N 290788 Double volute radial balance, centrifugal, horizontal, split Size & type - 3 x 6 x 9C MSD, 9-stage, 3" discharge, 6" suction, Impeller diameter 9.375", 3560 RPM, with oil lube system. Direct connected through coupling to a 675 HP Elliott DYR non-condensing steam turbine, with inlet steam conditions of 140 PSIG at 400°F with 15 PSIG exhaust, 3560 RPM. Equipped with pneumatic governor and separate oil lube system. All mounted on a common structural steel base.Approximate Dimensions: 126"L x 42"W x 41"H Weight: 9,000 Lbs

(One) Reconditioned 707 GPM* at 2700 FTDH (620 HP) Bingham-Willamette (Sulzer) Boiler Feed Pump, manufactured in 1970. S/N 200175 Double volute radial balance, centrifugal, horizontal, split Size & type - 3 x 6 x 9C MSD, 9-stage, 3" discharge, 6" suction, Impeller diameter 9.375", 3560 RPM, with oil lube system. Direct connected through coupling to a 620/720 HP Worthington non-condensing steam turbine, S/N 28774, S.0. #U-16786, model 2810T2RA with inlet steam conditions of 140 PSIG at 400°F with 15 PSIG exhaust, 3560/37 18 RPM Steam rate 39.2 #/HP-HR. Equipped with mechanical governor and separate oil lube system. All mounted on a common structural steel base. * Pump capacity is 738 at 2920 FTDH when operated at 37 18RPM, requiring 706 BHP.Approximate Dimensions: 126"L x 42"W x 41"H Weight: 9,000 Lbs

(Pic2) 14600 GPM @ 2530' TDH, Bingham, type 14 x 16 x 19CP, 3850 RPM, New

(Pic3) 330 GPM @ 2725' TDH, Sulzer-Bingham Boiler Feed Pumps, Type: MSE, Size 3X4X8.75B, 330 GPM at 2725'TDH. Rated Speed: 3560 RPM, Pumpage: Boiler Feedwater at Maximum 303Ú_ SG Saturated at Water, Impellers: 10 Stage, Single VoluteRotation: CCW, Discharge: 3" 900#ANSI, Suction: 4" 900#ANSI, John Crane Mechanical Seal Type 8B1, 20GPM Required For Cooling, Metastream Coupling, Driver: General Electric TEFC, Explosion Proof Induction Motor, Frame 5011LS, 350 HP, 4160V/60Hz/3Ph., 3600 RPM, Base-Mounted Dry Weight: 7500#Mfg: 1989, Qty 2 Used, Excellent Condition


SML RESOURCES INTERNATIONAL
FOR INQUIRIES CONTACT
ROY LEADER