Bingham Pumps (1 of 3)

(Pic1) 707 GPM @ 2700' TDH, Bingham MSD, 3X6X9C 9-stage, 3560 RPM motor or turbine,(3)
BOILER FEED PUMPS(3) THREE 707GPM @ 2700 FTDH BINGHAM-WILLAMETTE 9 STAGE (2) TURBINE & (1) MOTOR DRIVEN

(One) Reconditioned 707 GPM* at 2700 FTDH (620 HP) Bingham-Willamette (Sulzer) Boiler Feed Pump, manufactured in 1970. S/N 290787 Double volute radial balance, centrifugal, horizontal, split Size & type - 3 x 6 x 9C MSD, 9-stage, 3" discharge, 6" suction, Impeller diameter 9.375", 3560 RPM. Direct connected to a 1000 HP Westech gearbox, model 2109 MS, S/N 5424, Pinion RPM 3832, Ratio 2.156:1 Driven by a 900 HP Westinghouse drip proof motor, S/N 81F32449-1S-81, Frame 6808S, 3/60/7200V, 64 amps, temperature 90°C RTSF, insulation Class F, Design temperature rise B, Code G, S.F.1.0. Equipped with Allen Bradley vacuum starter with fuse disconnect. All mounted on a common structural steel base.*With this motor and gearbox, the pump operating conditions are 3832 RPM, 765 GPM at 3 16OFTDH requiring 786 BHP.Approximate Dimensions: 241"L x 60"W x 50"H Weight: 15,000 Lbs

(One) Reconditioned 707 GPM at 2700 FTDH (620 HP) Bingham-Willamette (Sulzer) Boiler Feed Pump, manufactured in 1970. S/N 290788 Double volute radial balance, centrifugal, horizontal, split Size & type - 3 x 6 x 9C MSD, 9-stage, 3" discharge, 6" suction, Impeller diameter 9.375", 3560 RPM, with oil lube system. Direct connected through coupling to a 675 HP Elliott DYR non-condensing steam turbine, with inlet steam conditions of 140 PSIG at 400°F with 15 PSIG exhaust, 3560 RPM. Equipped with pneumatic governor and separate oil lube system. All mounted on a common structural steel base.Approximate Dimensions: 126"L x 42"W x 41"H Weight: 9,000 Lbs

(One) Reconditioned 707 GPM* at 2700 FTDH (620 HP) Bingham-Willamette (Sulzer) Boiler Feed Pump, manufactured in 1970. S/N 200175 Double volute radial balance, centrifugal, horizontal, split Size & type - 3 x 6 x 9C MSD, 9-stage, 3" discharge, 6" suction, Impeller diameter 9.375", 3560 RPM, with oil lube system. Direct connected through coupling to a 620/720 HP Worthington non-condensing steam turbine, S/N 28774, S.0. #U-16786, model 2810T2RA with inlet steam conditions of 140 PSIG at 400°F with 15 PSIG exhaust, 3560/37 18 RPM Steam rate 39.2 #/HP-HR. Equipped with mechanical governor and separate oil lube system. All mounted on a common structural steel base. * Pump capacity is 738 at 2920 FTDH when operated at 37 18RPM, requiring 706 BHP.Approximate Dimensions: 126"L x 42"W x 41"H Weight: 9,000 Lbs

SML RESOURCES INTERNATIONAL
FOR INQUIRIES CONTACT
ROY LEADER